Verified product catalogue
Choose a product
56 products match
BFC-000124
Ductile Iron Gate Valve – Flanged PN16 – Soft Seated
Ductile Iron · PN16 · PN16
Price: On Application
BFC-000159
Cast Iron Gate Valve – Flanged PN16 – Stainless Steel Stem – PN16 Rated
Cast Iron · PN16 · PN16, PN10
Price: On Application
BFC-000167
CR Brass Gate Valve
Brass · Compression Ends · 15mm, 22mm, 28mm, 35mm, 42mm, 54mm
Price: On Application
BFC-000173
Ductile Iron Gate Valve – Flanged PN16 – Soft Seated – NBR
Ductile Iron · PN16 · PN16
Price: On Application
BFC-000180
Brass Vacuum Tanker Gate Valve – AGRI Square Flanged
Brass · AGRI Standard Square · 3 Bar, 2.5 Bar, 1.5 Bar
Price: On Application
BFC-000210
Brass Lockshield Gate Valve
Brass · Compression Ends · 15mm, 22mm, 28mm
Price: On Application
BFC-000213
Stainless Steel Gate Valve – Flanged PN16
Stainless Steel · PN16 · PN16
Price: On Application
BFC-000241
Forged Steel Gate Valve – Socket Weld
Forged Steel · Socket Weld · Class 800, 136.2 Bar
Price: On Application
BFC-000248
Cast Iron Gate Valve – Flanged Table E
Ductile Iron · Table E · 13.8 Bar
Price: On Application
BFC-000261
Cast Iron Gate Valve – Flanged PN16 – Brass Stem – PN10 Rated
Cast Iron · PN16 · PN16, PN10
Price: On Application
BFC-000276
Ductile Iron Gate Valve – Flanged PN16 – BS5163 Part 1 & 2:2004 – WRAS Approved
Ductile Iron · PN16 · PN16
Price: On Application
BFC-000277
Ductile Iron Gate Valve – Flanged PN16 – BS5150 (EN1171)
Ductile Iron · PN16 · PN16
Price: On Application
BFC-000282
Forged Steel Gate Valve – Flanged ANSI 150
Forged Steel · ANSI 150 · ANSI 150
Price: On Application
BFC-000284
Ductile Iron Gate Valve – BSI V7 Gas Approved – PN7 Rated
Ductile Iron · PN16 · PN7, PN16, 7 Bar
Price: On Application
BFC-000292
Brass Lockshield Gate Valve – PN20 – WRAS Approved
Brass · BSPT · PN20
Price: On Application
Technical overview and selection guidance
A gate moves linearly out of the flow path for isolation. These valves are generally selected for fully open or fully closed duty rather than routine throttling.
Where Non-Rising Stem Gate Valves fit
Non-Rising Stem Gate Valves may be considered where its operating principle, envelope and materials suit the process. Confirm whether the duty is isolation, throttling, diversion, non-return or pressure control; a familiar valve type is not automatically the lowest-risk choice.
Selection checklist
| Factor | What to confirm |
|---|---|
| Process medium | Composition, concentration, solids, viscosity, toxicity and cleaning regime. |
| Pressure and temperature | Normal, design, transient and vacuum conditions against the manufacturer curve. |
| Materials | Body, trim, seat, seals, fasteners and coatings—not body material alone. |
| Connections | Nominal size, bore, flange or thread standard, face-to-face and installation space. |
| Operation | Manual or actuated, cycle rate, closing time, fail action, feedback and utilities. |
| Compliance | Project specification, testing, water, fire-safe or hazardous-area requirements. |
Common specification mistakes
- Quoting only nominal size and pressure class.
- Assuming a material name proves chemical compatibility.
- Ignoring transient pressure, differential pressure or installation orientation.
- Selecting an actuator from running torque alone.
- Treating an approval held by one product variant as applying to the whole range.
Frequently asked questions
Can one pressure rating be applied to every Non-Rising Stem Gate Valves?
No. The allowable pressure changes with materials, temperature, design, size and the governing standard. Use the current product pressure-temperature table.
What information is needed for automation?
At minimum: valve make and model, size, differential pressure, measured or published torque/thrust, supply, cycle time, fail action, control signal and environment.