Verified product catalogue
Choose a product
81 products match
BFC-000377
Forged Steel Check Valve – Socket Weld
Forged Steel · Socket Weld · Class 800, 136.2 Bar
Price: On Application
BFC-000380
Forged Stainless Steel Lift Check Valve – Screwed BSPT
Stainless Steel · BSPT · Class 800
Price: On Application
BFC-000385
Cast Iron Dual Plate Check Valve – EPDM Seat – Clearance
Cast Iron · PN16 · PN16
Price: On Application
BFC-000392
Carbon Steel Hydraulic In-line Check Valve – ATR Series
Carbon Steel · BSPP · 5psi, 300 Bar, 200 Bar
Price: On Application
BFC-000393
Stainless Steel Check Valve – Screwed NPT – 6000psi
Stainless Steel · NPT · 6000psi, 0.33psi
Price: On Application
BFC-000394
Stainless Steel Check Valve – Screwed BSPT – 6000psi
Stainless Steel · BSPT · 6000psi, 0.33psi
Price: On Application
BFC-000413
Cast Iron Check Valve – Flanged PN16 – Stainless Steel Seat – Lever & Weight
Cast Iron · PN16 · PN16
Price: On Application
BFC-000418
Stainless Steel Dual Plate Check Valve – ANSI Wafer Pattern
Stainless Steel · Wafer · ANSI 150, PN10
Price: On Application
BFC-000420
Cast Iron Check Valve – Flanged PN16 – Stainless Steel Seat
Cast Iron · PN16 · PN16
Price: On Application
BFC-000426
Stainless Steel Check Valve – Compression Ends – Metric
Stainless Steel · Compression Ends · 6000psi, 0.33psi, 000psi
Price: On Application
BFC-000437
Cast Steel Swing Check Valve – Flanged ANSI 150
Cast Steel · ANSI 150 · ANSI 150
Price: On Application
BFC-000460
Cast Iron Check Valve – Flanged PN16 – EPDM Seat – Lever & Weight
Cast Iron · PN16 · PN16
Price: On Application
BFC-000487
CR Brass Single Check Valve – Screwed BSPP – WRAS Approved
Brass · BSPP · 0.1 Bar, 10 Bar
Price: On Application
BFC-000534
Cast Iron Check Valve – Flanged ANSI 150
Cast Iron · ANSI 150 · ANSI 150, PN16
Price: On Application
BFC-000537
Dual Plate Check Valve & Strainer – Flanged PN10
Ductile Iron · PN10 · PN10, PN16
Price: On Application
BFC-000563
Cast Steel Swing Check Valve – Flanged ANSI 300
Cast Steel · ANSI 300 · ANSI 300
Price: On Application
BFC-000566
Forged Steel Piston Check Valve – Flanged ANSI 150
Forged Steel · ANSI 150 · ANSI 150
Price: On Application
BFC-000570
Forged Steel Check Valve – Screwed NPT
Forged Steel · NPT · Class 800, 136.2 Bar
Price: On Application
BFC-000571
Dual Plate Check Valve – PN16 – Double Flanged
Ductile Iron · PN16 · PN16, PN10
Price: On Application
BFC-000577
Stainless Steel Ball Check Valve – Screwed BSPP
Stainless Steel · BSPP · PN16
Price: On Application
Technical overview and selection guidance
The valve opens from forward differential pressure and closes when flow decelerates or reverses. Closing dynamics, orientation and minimum velocity matter as much as nominal size.
Where Check Valves fit
Check Valves may be considered where its operating principle, envelope and materials suit the process. Confirm whether the duty is isolation, throttling, diversion, non-return or pressure control; a familiar valve type is not automatically the lowest-risk choice.
Selection checklist
| Factor | What to confirm |
|---|---|
| Process medium | Composition, concentration, solids, viscosity, toxicity and cleaning regime. |
| Pressure and temperature | Normal, design, transient and vacuum conditions against the manufacturer curve. |
| Materials | Body, trim, seat, seals, fasteners and coatings—not body material alone. |
| Connections | Nominal size, bore, flange or thread standard, face-to-face and installation space. |
| Operation | Manual or actuated, cycle rate, closing time, fail action, feedback and utilities. |
| Compliance | Project specification, testing, water, fire-safe or hazardous-area requirements. |
Common specification mistakes
- Quoting only nominal size and pressure class.
- Assuming a material name proves chemical compatibility.
- Ignoring transient pressure, differential pressure or installation orientation.
- Selecting an actuator from running torque alone.
- Treating an approval held by one product variant as applying to the whole range.
Frequently asked questions
Can one pressure rating be applied to every Check Valves?
No. The allowable pressure changes with materials, temperature, design, size and the governing standard. Use the current product pressure-temperature table.
What information is needed for automation?
At minimum: valve make and model, size, differential pressure, measured or published torque/thrust, supply, cycle time, fail action, control signal and environment.