Verified product catalogue
Choose a product
81 products match
BFC-000012
Brass Spring Check Valve – Male x Female
Brass · BSPP · 0.02 Bar, PN16, PN10
Price: On Application
BFC-000014
Brass Spring Check Valve – Acetal Disc
Brass · BSPP · 0.02 Bar, PN16, PN10, PN8
Price: On Application
BFC-000026
Brass Spring Check Valve – Metal Disc
Brass · BSPP · 0.02 Bar, PN35, PN25, PN12
Price: On Application
BFC-000039
Brass Mini Check Valve – Male x Female
PN16, 0.02 Bar · 1", 1/2", 3/4"
Price: On Application
BFC-000042
Brass Spring Check Valve- Metal Disc – High Pressure
Brass · BSPP · 0.02 Bar, PN50, PN35
Price: On Application
BFC-000058
Stainless Steel Check Valve – PTFE Gasket
Stainless Steel · BSPP · PN63
Price: On Application
BFC-000067
Brass Spring Check Valve
Brass · BSPP · 0.05 Bar, PN40, PN32, PN25, PN16
Price: On Application
BFC-000069
Brass Mini Check Valve – Female x Male
Brass · BSPP · PN16, 0.02 Bar
Price: On Application
BFC-000072
Dual Plate Check Valve – EPDM Seat – WRAS Approved
Cast Iron · Wafer · PN16
Price: On Application
BFC-000082
Brass Spring Check Valve – Metal Disc – Male x Male
Brass · BSPP · 0.02 Bar, PN35, PN25
Price: On Application
BFC-000089
304 Stainless Steel Spring Check Valve – Viton Seat
Stainless Steel · BSPP · PN16
Price: On Application
BFC-000092
Brass Spring Check Valve – Female x Male
Brass · BSPP · 0.02 Bar, PN16, PN10
Price: On Application
BFC-000094
Ball Check Valve – Screwed BSPP
Cast Iron · BSPP · PN10, 0.3 Bar, 0.5 Bar
Price: On Application
BFC-000104
Stainless Steel Spring Check Valve – Wafer Pattern
Stainless Steel · Wafer · PN6/10, ANSI 150, ANSI 300, PN10/16, PN50
Price: On Application
BFC-000127
DZR Brass Double Check Valve – Screwed BSPP – WRAS Approved
Brass · BSPP · 0.1 Bar, 16 Bar
Price: On Application
BFC-000138
Ball Check Valve – Flanged PN10
Ductile Iron · PN10 · PN10, 0.3 Bar, 0.5 Bar, PN16, ANSI 150
Price: On Application
BFC-000140
Stainless Steel Swing Check Valve – Screwed BSPP
Stainless Steel · BSPP · 200psi
Price: On Application
BFC-000152
Ductile Iron Check Valve – PN16 – Lever & Weight – WRAS Approved
Ductile Iron · PN16 · PN16
Price: On Application
BFC-000153
316 Stainless Steel Spring Check Valve
Stainless Steel · BSPP · PN16
Price: On Application
BFC-000161
304 Stainless Steel Spring Check Valve – EPDM Seat – WRAS Approved
Stainless Steel · BSPP · PN16
Price: On Application
Technical overview and selection guidance
The valve opens from forward differential pressure and closes when flow decelerates or reverses. Closing dynamics, orientation and minimum velocity matter as much as nominal size.
Where Check Valves fit
Check Valves may be considered where its operating principle, envelope and materials suit the process. Confirm whether the duty is isolation, throttling, diversion, non-return or pressure control; a familiar valve type is not automatically the lowest-risk choice.
Selection checklist
| Factor | What to confirm |
|---|---|
| Process medium | Composition, concentration, solids, viscosity, toxicity and cleaning regime. |
| Pressure and temperature | Normal, design, transient and vacuum conditions against the manufacturer curve. |
| Materials | Body, trim, seat, seals, fasteners and coatings—not body material alone. |
| Connections | Nominal size, bore, flange or thread standard, face-to-face and installation space. |
| Operation | Manual or actuated, cycle rate, closing time, fail action, feedback and utilities. |
| Compliance | Project specification, testing, water, fire-safe or hazardous-area requirements. |
Common specification mistakes
- Quoting only nominal size and pressure class.
- Assuming a material name proves chemical compatibility.
- Ignoring transient pressure, differential pressure or installation orientation.
- Selecting an actuator from running torque alone.
- Treating an approval held by one product variant as applying to the whole range.
Frequently asked questions
Can one pressure rating be applied to every Check Valves?
No. The allowable pressure changes with materials, temperature, design, size and the governing standard. Use the current product pressure-temperature table.
What information is needed for automation?
At minimum: valve make and model, size, differential pressure, measured or published torque/thrust, supply, cycle time, fail action, control signal and environment.