Verified product catalogue
Choose a product
10 products match
BFC-000135
Stainless Steel Hygienic Butterfly Valve – Clamp Ends
Stainless Steel · Clamp · PN10
Price: On Application
BFC-000225
Stainless Steel Wafer Butterfly Valve – Stainless Steel Disc – EPDM Liner
Stainless Steel · ANSI 150, PN10, PN16, PN6, Table D, Table E, Wafer · PN6/10, ANSI 150, PN16
Price: On Application
BFC-000347
Stainless Steel Wafer Butterfly Valve – Stainless Steel Disc – PTFE Liner
Stainless Steel · ANSI 150, PN10, PN16, PN6, Table D, Table E, Wafer · PN6/10, ANSI 150, PN16
Price: On Application
BFC-000388
Stainless Steel Hygienic Butterfly Valve – Butt Weld OD
Stainless Steel · Butt Weld · PN10
Price: On Application
BFC-000472
Stainless Steel Wafer Butterfly Valve – Stainless Steel Disc – FKM (Viton) Liner
Stainless Steel · ANSI 150, PN10, PN16, PN6, Table D, Table E, Wafer · PN6/10, ANSI 150, PN16
Price: On Application
BFC-000706
Stainless Steel Hygienic Butterfly Valve – RTJ Ends
Stainless Steel · RTJ · PN10
Price: On Application
BFC-000837
Stainless Steel High Performance Butterfly Valve – Wafer Type – Stainless Steel Disc – RPTFE Seat
Stainless Steel · ANSI 150, PN10, PN16, PN25, Wafer · PN10/16, ANSI 150, PN25
Price: On Application
BFC-000838
Stainless Steel High Performance Butterfly Valve – Wafer Type – Stainless Steel Disc – RPTFE & Inconel 625 Seat
Stainless Steel · ANSI 150, PN10, PN16, PN25, Wafer · PN10/16, ANSI 150, PN25
Price: On Application
BFC-000841
Stainless Steel High Performance Butterfly Valve – Lugged PN16-25 – Stainless Steel Disc – RPTFE Seat
Stainless Steel · Lugged, PN16, PN25 · PN16, PN16/25, PN25, ANSI 150
Price: On Application
BFC-000842
Stainless Steel High Performance Butterfly Valve – Lugged PN16-25 – Stainless Steel Disc – RPTFE & Inconel 625 Seat
Stainless Steel · Lugged, PN16, PN25 · PN16, PN16/25, PN25, ANSI 150
Price: On Application
Technical overview and selection guidance
A circular disc rotates within the pipe. The disc remains in the flow path, so geometry, velocity, seat design and clearance influence torque and pressure loss. Stainless steel grade and product construction must be matched to chloride level, temperature and fabrication requirements; “stainless” is not a universal corrosion guarantee.
Where Stainless Steel Butterfly Valves fit
Stainless Steel Butterfly Valves may be considered where its operating principle, envelope and materials suit the process. Confirm whether the duty is isolation, throttling, diversion, non-return or pressure control; a familiar valve type is not automatically the lowest-risk choice.
Selection checklist
| Factor | What to confirm |
|---|---|
| Process medium | Composition, concentration, solids, viscosity, toxicity and cleaning regime. |
| Pressure and temperature | Normal, design, transient and vacuum conditions against the manufacturer curve. |
| Materials | Body, trim, seat, seals, fasteners and coatings—not body material alone. |
| Connections | Nominal size, bore, flange or thread standard, face-to-face and installation space. |
| Operation | Manual or actuated, cycle rate, closing time, fail action, feedback and utilities. |
| Compliance | Project specification, testing, water, fire-safe or hazardous-area requirements. |
Common specification mistakes
- Quoting only nominal size and pressure class.
- Assuming a material name proves chemical compatibility.
- Ignoring transient pressure, differential pressure or installation orientation.
- Selecting an actuator from running torque alone.
- Treating an approval held by one product variant as applying to the whole range.
Frequently asked questions
Can one pressure rating be applied to every Stainless Steel Butterfly Valves?
No. The allowable pressure changes with materials, temperature, design, size and the governing standard. Use the current product pressure-temperature table.
What information is needed for automation?
At minimum: valve make and model, size, differential pressure, measured or published torque/thrust, supply, cycle time, fail action, control signal and environment.