Raw and treated water duties require attention to drinking-water approvals, corrosion, low-pressure operation, surge and maintainability.
Typical process areas
Map each valve to a specific service rather than applying one material or design across the whole plant. Separate clean utilities from solids-bearing, corrosive, hygienic, high-temperature and safety-critical duties.
Valve selection priorities
- Characterise the media at normal, cleaning, start-up and upset conditions.
- Check pressure, temperature, flow velocity, differential pressure and transient behaviour.
- Choose a flow path that manages solids, fibres, crystallisation or contamination risk where relevant.
- Confirm maintainability, isolation philosophy and safe access.
- Identify project, regulatory, client and third-party approval requirements.
Common valve families
Ball, butterfly, gate, globe, check and control valves may all be relevant, but their role changes by application. Pump discharge non-return duty, modulating control and infrequent line isolation should not be treated as the same problem.
Materials and automation
Material selection covers wetted and external components. For automated valves, define the utility supply, control signal, required operating time, feedback, fail action, ingress protection and hazardous-area classification.
Recommended starting points
Products often considered for this industry
These are useful catalogue starting points. Final suitability depends on the complete media, pressure, temperature, connection and operating duty.
BFC-000138
Ball Check Valve – Flanged PN10
Ductile Iron · PN10 · PN10, 0.3 Bar, 0.5 Bar, PN16, ANSI 150
Price: On Application
BFC-000395
1000mm Stem Extensions for Butterfly Valves – to suit Brandoni Type
Ductile Iron · 10" to 16", 2" to 4", 5" & 6", 8"
Price: On Application
BFC-000248
Cast Iron Gate Valve – Flanged Table E
Ductile Iron · Table E · 13.8 Bar
Price: On Application