Verified product catalogue
Choose a product
11 products match
BFC-000702
Flowinn Aluminium Electric Actuator – Modulating Positioner
Aluminium
Price: On Application
BFC-000808
Valbia Aluminium Electric Actuator – Modulating Positioner – Battery Back Up
Aluminium
Price: On Application
BFC-000809
Valbia Aluminium Electric Actuator – Modulating Positioner
Aluminium
Price: On Application
Technical overview and selection guidance
The automated assembly must be assessed as a valve, actuator, mounting kit and control system. Output at the critical point of travel must exceed the verified valve demand with an appropriate design margin.
Where Explosion-Protected Electric Actuators fit
Explosion-Protected Electric Actuators may be considered where its operating principle, envelope and materials suit the process. Confirm whether the duty is isolation, throttling, diversion, non-return or pressure control; a familiar valve type is not automatically the lowest-risk choice.
Selection checklist
| Factor | What to confirm |
|---|---|
| Process medium | Composition, concentration, solids, viscosity, toxicity and cleaning regime. |
| Pressure and temperature | Normal, design, transient and vacuum conditions against the manufacturer curve. |
| Materials | Body, trim, seat, seals, fasteners and coatings—not body material alone. |
| Connections | Nominal size, bore, flange or thread standard, face-to-face and installation space. |
| Operation | Manual or actuated, cycle rate, closing time, fail action, feedback and utilities. |
| Compliance | Project specification, testing, water, fire-safe or hazardous-area requirements. |
Common specification mistakes
- Quoting only nominal size and pressure class.
- Assuming a material name proves chemical compatibility.
- Ignoring transient pressure, differential pressure or installation orientation.
- Selecting an actuator from running torque alone.
- Treating an approval held by one product variant as applying to the whole range.
Frequently asked questions
Can one pressure rating be applied to every Explosion-Protected Electric Actuators?
No. The allowable pressure changes with materials, temperature, design, size and the governing standard. Use the current product pressure-temperature table.
What information is needed for automation?
At minimum: valve make and model, size, differential pressure, measured or published torque/thrust, supply, cycle time, fail action, control signal and environment.