Verified product catalogue
Choose a product
90 products match
BFC-000043
Brass Solenoid Valve – Normally Open – NBR Diaphragm
Brass · BSPP · 0.1 Bar, 0.2 Bar, 0.4 Bar, 15 Bar, 12 Bar, 10 Bar
Price: On Application
BFC-000076
Brass Solenoid Valve – Normally Closed – NBR Diaphragm
Brass · BSPP · 0.1 Bar, 0.2 Bar, 0.4 Bar, 15 Bar, 12 Bar, 10 Bar
Price: On Application
BFC-000077
Brass Solenoid Valve – Direct Acting – 3/8 ” to 1″
Brass · BSPP · 5 Bar, 3 Bar
Price: On Application
BFC-000097
Brass Solenoid Valve – Servo-assisted – Normally Closed
Brass · BSPP · 0.15 Bar, 25 Bar, 20 Bar
Price: On Application
BFC-000191
Stainless Steel Angle Seat Valve fitted with Single Acting PA Actuator
Stainless Steel · BSPP · PN25
Price: On Application
BFC-000256
Brass Solenoid Valve – 2/2 Pilot Operated – Normally Closed
Brass · BSP · 0.15 Bar, 16 Bar, 14 Bar, 10 Bar
Price: On Application
BFC-000257
Brass Solenoid Valve – Servo-assisted – Normally Open
Brass · BSPP · 0.15 Bar, 25 Bar, 20 Bar
Price: On Application
BFC-000269
Stainless Steel Solenoid Valve – Servo-assisted – Normally Closed
Stainless Steel · BSPP · 0.15 Bar, 25 Bar
Price: On Application
BFC-000342
Brass Solenoid Valve – Direct Acting 2/2 – Viton Diaphragm
Brass · BSP · 10 Bar, 8 Bar, 6 Bar, 4 Bar
Price: On Application
BFC-000386
Brass Solenoid Valve – 2/2 Pilot Operated – Normally Open
Brass · BSP · 0.15 Bar, 16 Bar, 14 Bar, 10 Bar
Price: On Application
BFC-000409
Brass Solenoid Valve – Direct Acting 3/2 – Viton Diaphragm
Brass · BSP · 20 Bar
Price: On Application
BFC-000415
Brass Solenoid Valve – Normally Closed – Viton Diaphragm
Brass · BSPP · 0.1 Bar, 0.2 Bar, 0.4 Bar, 15 Bar, 12 Bar, 10 Bar
Price: On Application
BFC-000425
Brass Solenoid Valve – Normally Open – Viton Diaphragm
Brass · BSPP · 0.1 Bar, 0.2 Bar, 0.4 Bar, 15 Bar, 12 Bar, 10 Bar
Price: On Application
BFC-000458
Brass Solenoid Valve – 2/2 Combined Acting – NBR Diaphragm
Brass · BSP · 12 Bar, 10 Bar, 6 Bar
Price: On Application
BFC-000465
Stainless Steel Solenoid Valve – Servo-assisted – Normally Open
Stainless Steel · BSPP · 0.15 Bar, 25 Bar
Price: On Application
BFC-000515
Stainless Steel Solenoid Valve – 2/2 Combined Acting – Viton Diaphragm
Stainless Steel · BSP · PN16
Price: On Application
BFC-000517
RAC1 Stainless Steel Solenoid Valve – Direct Acting 2/2 – Viton Diaphragm
Stainless Steel · BSP · 20 Bar, 19 Bar
Price: On Application
BFC-000518
Brass Solenoid Valve – Direct Acting 2/2 – Viton Diaphragm
Brass · BSP · 16 Bar, 8 Bar
Price: On Application
BFC-000557
Solenoid Operated Gas Safety Shut-off Valve – Flanged PN16 – Automatic Reset
Aluminium · PN16 · PN16
Price: On Application
BFC-000558
Solenoid Operated Gas Safety Shut-off Valve – Screwed BSPP – Automatic Reset
Aluminium · BSPP · 1 1/2", 1 1/4", 1", 1/2", 2", 3/4"
Price: On Application
Technical overview and selection guidance
The suitability of this valve depends on the detailed design rather than the category name alone.
Where NAMUR Accessories fit
NAMUR Accessories may be considered where its operating principle, envelope and materials suit the process. Confirm whether the duty is isolation, throttling, diversion, non-return or pressure control; a familiar valve type is not automatically the lowest-risk choice.
Selection checklist
| Factor | What to confirm |
|---|---|
| Process medium | Composition, concentration, solids, viscosity, toxicity and cleaning regime. |
| Pressure and temperature | Normal, design, transient and vacuum conditions against the manufacturer curve. |
| Materials | Body, trim, seat, seals, fasteners and coatings—not body material alone. |
| Connections | Nominal size, bore, flange or thread standard, face-to-face and installation space. |
| Operation | Manual or actuated, cycle rate, closing time, fail action, feedback and utilities. |
| Compliance | Project specification, testing, water, fire-safe or hazardous-area requirements. |
Common specification mistakes
- Quoting only nominal size and pressure class.
- Assuming a material name proves chemical compatibility.
- Ignoring transient pressure, differential pressure or installation orientation.
- Selecting an actuator from running torque alone.
- Treating an approval held by one product variant as applying to the whole range.
Frequently asked questions
Can one pressure rating be applied to every NAMUR Accessories?
No. The allowable pressure changes with materials, temperature, design, size and the governing standard. Use the current product pressure-temperature table.
What information is needed for automation?
At minimum: valve make and model, size, differential pressure, measured or published torque/thrust, supply, cycle time, fail action, control signal and environment.